Thứ Tư, 16 tháng 10, 2024

Sanbox reports error of Framework

 1. Install updated version of FrameWork

2. Update Sandbox

Thứ Sáu, 4 tháng 10, 2024

Why blogger post keeps going down to a section when opened?

 Make sure that any <p> code of that section is put between a <div></div>.

Thứ Tư, 5 tháng 6, 2024

Install Win 10 on WMware: Windows Cannot Find the Microsoft Software License Terms Error

 Solution: Donot Add the ISO link right away when creating New Machine, but add later (after finishing creating New Machine).

Install Win 10 on VMware: EFI Network Time-out Error

Solution: In the VMWare folder, open the [Name of Machine].vmx in Notepad and change the firmware to bios.


For example:

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "19"
mks.enable3d = "TRUE"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
hpet0.present = "TRUE"
nvram = "Windows 10 and later x64.nvram"
virtualHW.productCompatibility = "hosted"
gui.exitOnCLIHLT = "FALSE"
powerType.powerOff = "soft"
powerType.powerOn = "soft"
powerType.suspend = "soft"
powerType.reset = "soft"
displayName = "Windows 10 and later x64"
usb.vbluetooth.startConnected = "TRUE"
firmware = "efi" Change to firmware = "bios"
sensor.accelerometer = "pass-through"
sensor.ambientLight = "pass-through"
sensor.compass = "pass-through"
sensor.gyrometer = "pass-through"
sensor.inclinometer = "pass-through"
sensor.location = "pass-through"
sensor.orientation = "pass-through"
guestOS = "windows9-64"
tools.syncTime = "FALSE"
sound.autoDetect = "TRUE"
sound.virtualDev = "hdaudio"
sound.fileName = "-1"
sound.present = "TRUE"
numvcpus = "2"
memsize = "1024"
mem.hotadd = "TRUE"
sata0.present = "TRUE"
nvme0.present = "TRUE"
nvme0:0.fileName = "Windows 10 and later x64.vmdk"
nvme0:0.present = "TRUE"
sata0:1.autodetect = "TRUE"
sata0:1.deviceType = "cdrom-raw"
sata0:1.fileName = "auto detect"
sata0:1.present = "TRUE"
usb.present = "TRUE"
ehci.present = "TRUE"
usb_xhci.present = "TRUE"
svga.graphicsMemoryKB = "8388608"
ethernet0.connectionType = "nat"
ethernet0.addressType = "generated"
ethernet0.virtualDev = "e1000e"
serial0.fileType = "thinprint"
serial0.fileName = "thinprint"
ethernet0.present = "TRUE"
serial0.present = "TRUE"
extendedConfigFile = "Windows 10 and later x64.vmxf"
floppy0.present = "FALSE"

Thứ Bảy, 13 tháng 4, 2024

Thứ Năm, 11 tháng 1, 2024

Solution to OBS Problem "Failed to start recording/streaming"

SOLUTION TO PROBLEM WHEN USING OBS:  [Failed to start recording. Starting the output failed. Please check the log for details. NOTE: If you are using the NVENC or AMD encoders, make sure your video drivers are up to date.]


Thứ Ba, 2 tháng 1, 2024

Disable Driver Compatibility Warning (LOCAL GROUP POLICY EDITOR)

 Run CMD gpedit.msc

USER CONFIGURATION > ADMINISTRATIVE TEMPLATES > SYSTEM > DRIVER INSTALLATION

ĐƯỢC XEM NHIỀU